black blue and yellow textile

LP150

LP mid/ low pressure scuba diving hose

for scuba diving regulator/ octopus/ BC/ inflator, 2nd stage

black blue and yellow textile

SPECS

◆ ID / OD : 6.5 / 12 (mm)

◆ W.P. / B.P. : 1500 / 6,000 (psi)

◆ INNER TUBE : POLYESTER

◆ JACKET (COATING) : POLYESTER FILAMENT

◆ FITTING TENSILE STRENGTH : 195 kgf/cm²

◆ COLOR :

Black(BK) / Yellow(YL) / Pink (PK) / Blue(BL) / Green(DG) / Red(RE) / Florescent Yellow(LY) / Watermelon (WM)

black blue and yellow textile

FEATURES EXTREMELY SOFT HOSE THAT PREVENT THE DIVERS FROM JAW FATIGUE

◆ Easy clean and maintenance.

◆ Polyester double braiding is better water resistance than Nylon braid jacket.

◆ Firmly glued inner tube and braiding jacket extend enormously stronger

◆ Fluently healthy air flow rather than sulfide contamination of rubber tube.

◆ 100% leak test check before shipment.

◆ Eternal marking: Manufacture date coding on outer thread end.

◆ Inner tube: HS-PVC longer service period compared to PU base.

HS-PVC DATA SHEET

◆ Density (ASTM 297, 23℃ ) :

1.08 (g/cm³)

◆ Hardness (ASTM 2240) : 75 (Shore A)

◆ Tensile Strength at Break (ASTM 412) :

50 (kg / cm²)

◆ Elongation at Break (ASTM 412) :

200 (%)

◆ 100% Modulus (ASTM 790) :

40 (kg / cm²)

◆ Tear Strength (ASTM 624) :

28 (kg / cm²)

◆ Low Temerature Brittleness

(ASTM 746) : -40 (℃)

◆ Max. Temerature/ Intermittent

(ASTM 746) : 150 (℃)

◆ Service Temerature (ASTM 746) :

135~ -30 (℃)

BLEED TEST

Or someone else will hire you to build theirs. Here is how you can take action – starting today.

black blue and yellow textile